How to maintain the car Ceramic Brake Pad ? Brake system is essential for the safety of motorists, once the brake system failure in motion, often lead to major accidents. So owners should pay attention to routine maintenance and fault elimination method to learn the braking system.
1. regular inspection, replace the brake fluid
Clean, high-quality brake fluid is the brake system maintains the basic conditions for good working conditions.
Monthly brake fluid level should be checked regularly, if the braking surface sustained significant decline, it should go to the 4S shop to be checked. Also high purity brake fluid, if the impurity contamination or mix with air, it will seriously affect the braking effect, brake fluid contamination should put spare liquid and rinse the entire system, and then the master cylinder filled with a new solution.
The color of the brake fluid will warn. If the brake fluid color is too deep, it may malfunction.
2. brakes and brake pads should be checked trembling brakes
Especially when the vehicle brakes car body shake, or brake disc brake pads are often caused by deformation. If after replacing brake pads and brake discs, fault temporarily excluded; a couple of months later, the failure phenomenon has emerged, it should be checked for the side wheels, wheel deformation can also cause the brakes jitter.
3. carefully pull the handbrake after winter car wash
The principle is the use of the handbrake lever to pull the hand brake force through the brake lines to convey its forces on the rear brake system. After washing the winter, water may enter the brake lines, in the state of the water drop down on the handbrake, and after a long stop after the water will freeze at this time, even if the brake lever back, brake lines will not move . Therefore, after the winter car wash, we should let the car travel some distance, and then stop handbrake.
More information, please visit: http://www.antaibrake.com/